Product Listings

This high intensity light bar features 72 bi-color LEDs in 4 clusters and housed in a black polycarbonate case with clear lenses. Easily mounted to the underside of just about any toprack, this light bar is designed to enhance visibility with or without a topcase mounted! Light bar can also be flush mounted on any flat surface, including license plate brackets.

The Bags-Connection Daypack II Quick-Lock Tankbag is a small 5-liter to 7-liter tankbag that locks to a subtle bracket that installs to pre-existing threaded holes in the motorcycle’s gascap. Includes a large external lid pocket.

This luggage bag is made from waterproof PVC and secures with a 4-point attachment system. Available in 34 and 60 liter sizes!

This waterproof sport-touring pack system is reinforced with an aluminum frame for stability and strength. Features 25 to 38 liters of storage volume. Backpack straps included for easy off-bike transportation. 2 year warranty!

Expandable from 10 to 15 liters, the Reverse can used as a rear seat bag or a tankbag! Waterproof inner bag and sidepockets with waterproof zippers.

Barkbusters Storm Handguards with full-wrap aluminum backbone offer maximum protection from the wind and rain while using the same aluminum backbone as the VPS Handguards. The larger profile of Storm handguards offers more weather protection, but is less suited to tight offroad singletrack use.

Barkbusters VPS handguards feature an aluminum back bone with a stylish, replaceable plastic guard to yield a truly functional handguard. Available in black, blue, green, orange, red, silver, white and yellow.

The XBi2 is Chatterbox's latest bike-to-bike wireless intercom that also comes equipped with A2DP Bluetooth technology. It has all the features that the XBi has but with additional power that will allow simultaneous communications between 3 riders with up to 500 meters of range [1,640 ft] in optimum conditions.

Twisted Throttle is proud to present Denali LED Lighting. The Denali D1 light kit was designed from the ground up specifically for use on motorcycles. The compact 2”-square lamps house ultra-bright LED's with an incredibly low draw of 0.75 amps each. A two lamp kit provides similar light output as dual 55-watt halogen kits on the market.

Do it all with the rugged, waterproof, multi-mode nüvi 550. Drive, hike, bike or boat — this dynamic device switches modes to navigate your active lifestyle. It's packed with detailed street maps for North America or Europe and millions of places. Like the 500, nüvi 550 provides spoken turn-by-turn directions to your destination and accepts optional maps for any adventure.

motorcycle-friendly design, card slot, preloaded, full coverage, optional traffic alerts, anti-theft, MP3 player, picture viewer, speaks street names, XM Satellite compatible, Bluetooth wireless

Take a ride on a new route and explore the open road with the zūmo 660. This motorcycle-friendly navigator was built to lead you on all of your two-wheeled adventures. Whether you’re on a weekday ride just across town or a weeklong trip to an annual rally with friends, the zūmo 660 is ready to show you the way.

This E-series model-specific adapter plate is designed to add a Givi Monokey case to your existing OEM toprack or tailsection (model-dependent). Depending on the model, the adapter plate may be cast aluminum or durable molded nylon. Rugged black finish. All necessary mounting hardware and installation diagram included.

GSG-Moto’s rock-solid crash protectors for your axles are built to the same strength and design specifications as GSG-Moto’s top-quality framesliders. Complete with replaceable heads and CNC-milled billet aluminum construction, these sliders will lower the repair cost of your next crash-landing, whether at the racetrack or on the road.

GSG-Moto’s rock-solid crash protectors for your axles are built to the same strength and design specifications as GSG-Moto’s top-quality framesliders. Complete with replaceable heads and CNC-milled billet aluminum construction, these sliders will lower the repair cost of your next crash-landing, whether at the racetrack or on the road.

Constructed of heavy-duty machined steel, aluminum, and Delrin, GSG-Moto clutch/alternator protectors are designed to provide maximum protection and high-quality fit and finish.

The primary purpose of GSG-Moto’s Swingarm Spool Sliders is to provide the lifting points used by a rear race stand, easing bike maintenance and providing a convenient way to keep your bike upright on track days. Built to withstand more abuse than typical swingarm spools, GSG-Moto’s Swingarm Spool Sliders double as medium-duty axle sliders.

Used to convert 22mm handlebar clamps to 28mm handlebar clamps. Fits hole distances 30-37mm w/ M8 bolts. Black or Silver.

Provides a more upright, comfortable riding position by raising and retracting the original 7/8" (22mm) diameter tubular handlebar. No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and install the replacement top clamp using included hardware. Barbacks increase handlebar height by 25mm (1.0") and move them back 25mm (1.0"), producing an overall handlebar displacement of 35.4mm (1.4") at a 45 degree angle from the original position.

Provides a more upright, comfortable riding position by raising the original 7/8" (22mm) diameter tubular handlebar. No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and reinstall top clamp using included hardware. Choose a rise height of 20mm (0.8"), 25mm (1"), 30mm (1.2"), or 50mm (2").

Readily installed on either the upper or lower license plate bolts, this is the perfect accessory for securing your helmet to your bike!

Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight.

Kaoko Cruise Controls are purpose-built for a variety of motorcycles over 600cc. They consist of a friction nut that is integral with a replacement handlebar-end weight.

This MFE 99 Explorer-19 is a DOT-approved front tire with a load and speed rating of 54T. It can be used as a tubeless or tube-type tire.

MFW's bike specific Vario Mounting Brackets allow you to use their indexed footpeg mounting system to displace your footpegs using 3 different displacement arms and rotate your footpegs to 8 possible positions. Compatible only with MFW footpegs. Sold in pairs. Available in silver.

Same shape as the original manufacturer's windshield. Available in 7 colors!

The MRA SpoilerScreen is a flat, sport-styled windshield with a deep recess in the center and a small spoiler in the center. Available in 10 colors.

Similar in shape to the original windscreen, the MRA TouringScreen includes a raised extension approximately 2-3 inches (5-7 cm) taller than the original windscreen.

Extend your riding range with this heavy-duty fuel canister! Air-tight seal allows fuel to be stored longer by preventing air from entering and degrading fuel. Made from single-piece, impact-extruded aluminum to prevent leaks and cracks. Bolstered shoulder and base to resist bulging when pressurized.

Highly reflective visibility vest designed to be worn over your riding gear for ultimate rider visibility.

Bungee cargo net for use on rear seats and luggage racks. Available in 2 sizes.

The only pressure gauge you’ll ever need. Precision measuring up to 199.9 PSI/13.8 Bar in 0.1 PSI/BAR increments

The Oxford First Aid kit fits under the seat of most motorcycles (4” x 5.7” x 1.8”) and contains hygienically sealed medical supplies.

These hand covers mount to your handlebars to keep your hands warm & dry even in the coldest riding weather!

The ultimate motorcycle sidestand support. Prevents sidestand from sinking into mud, slipping on loose gravel, and generally getting out of control! Park your bike with confidence on any surface with the MagniMate.

Tiny, all-weather clock/thermometer for handlebar or cockpit mounting. Includes ice alert and Velcro adhesive!

For 7/8"-diameter handlebars with 4.75" to 4.9"-long open-ended original grips (the most common grip size for sportbikes, enduros, and scooters). NEW 'Sport' grip style!

Motorcycle tool kit with carry case designed to fit under most rear seats (4” x 7” 1.25”)

Rated at 4000K and illimunating 110 watts of light from only 55W, these bulbs emit a brilliant Xtreme cool white light. This white light gives the driver better color recognition for depth perception and better contrast than conventional halogen lamps.

Durable, dependable and reliable, PIAA Powersports Anti-Vibration bulbs are specifically designed for Powersports to significantly increase bulb life and performance.

ROK Straps "flat stretch straps" are designed specifically for motorcycles, ATV's (quads), and snowmobiles. Secure anything to a motorcycle without scratches - no hooks. Loops on both ends can be secured to just about anything, and the mid-strap buckle allows you to tighten the strap to your needs.

ROK Straps "flat stretch straps" are designed specifically for motorcycles, ATV's (quads), and snowmobiles. Secure anything to a motorcycle without scratches - no hooks. Loops on both ends can be secured to just about anything, and the mid-strap buckle allows you to tighten the strap to your needs.

Dual-tone air horn from Stebel of Italy available in Black or Chrome. Loud enough to convince other drivers that there's a derailed freight train barreling down on them. Don't press the horn button in the garage, it hurts! At 139dB it can be heard for almost 3 city blocks! YEEEOOOWWW!

The new Stop & Go Portable Mini-Air Compressor measures only 4" x 2" x 6" making it possible to be carried on virtually any motorcycle, scooter, or ATV. The built-in gauge allows you to observe the increased pressure with a reading up to 120 psi.